在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

What are the lubrication methods for rubber joints

Time: 03-04 󰃯 Reading times: 807 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: Rubber joint is also called rubber pipe flexible joint, flexible rubber joint, rubber flexible joint, flexible rubber joint, high pressure rubber joint, rubber shock absorber, compensator, etc. According to the connection mode, it can be divided into loose flange type, fixed flange type and thread type

Rubber joint It is also called rubber pipe flexible joint, flexible rubber joint Rubber flexible joint Flexible rubber joint, high pressure rubber joint, rubber Shock absorber Compensator Etc. According to the connection mode, it can be divided into loose flange type, fixed flange type and thread type; according to the structure, it can be divided into 5 types: single sphere, double sphere, reducer, curved sphere and air pressure coil. It consists of inner and outer layers, ply and, Reducing rubber joint After vulcanization, the steel ring is formed in parallel with the steel ring, Double ball rubber joint It is composed of loose sleeve. This product can reduce vibration and noise, and can compensate the thermal expansion and cold contraction caused by temperature change.

According to the characteristics of rubber joint structure, different lubrication methods can be used, including the following situations:
1. Pressure lubrication method: the mechanical (such as oil pump, oiler) will automatically pressure lubricating parts of lubricating oil, also known as pressure lubrication method. This method is used in large and medium rubber joints with crosshead.
2. Splash lubrication: the oil is splashed to the lubricating parts by the oil rod installed on the connecting rod, so the cylinder and the moving mechanism can only use the same lubricating oil. This method is often used in small rubber joints without crosshead. Its disadvantage is that the oil is not easy to filter and the oil level must be strictly controlled.
3. Spray in lubrication method: the oil mist injected will follow the gas into the cylinder and other lubrication places, such as ultra-high pressure rubber joint, sliding vane rubber joint and screw rubber joint.
4. Drip lubrication -- use the oil cup and oil pipeline to send the lubricating oil to the parts that should be filled, or fill the lubricating oil with the oil pot on time.
5. Oil ring lubrication method: use the rotating shaft to drive the oil ring on the shaft, and the oil ring will bring the oil in the oil pool into the bearing for circulating lubrication.
This paper summarizes the different lubrication methods of rubber joint, hoping to help you in the process of using rubber joint. Luoying rubber joint professional research rubber joint, you have any questions in the process of using our products, you can ask our experts through our contact information. We serve you warmly.