在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

Flexible rubber joint instructions and application scope

Time: 03-07 󰃯 Reading times: 501 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: High rise residential water supply and drainage application of this product, the pipeline needs to have fixed fixed support or fixed bracket, otherwise the product should be installed with anti pulling device. The force to fix the fixed support point or the fixed support needs to exceed the radial force, otherwise the anti pulling device should also be installed. You can rely on

High rise residential water supply and drainage application of this product, the pipeline needs to have fixed fixed support or fixed bracket, otherwise the product should be installed with anti pulling device. The force to fix the fixed support point or the fixed support needs to exceed the radial force, otherwise the anti pulling device should also be installed.
You can choose according to your own pipeline application pressure: 0.25MPa, 0.6MPa, 1.0MPa, 1.6Mpa, 2.5MPa, 4.0Mpa Rubber joint Please refer to flange dimension table for connection specifications.
Because of its excellent comprehensive performance, it is widely used in chemical plants, buildings, water supply and drainage, drainage pipelines, crude oil, light and light industry, refrigeration, environmental sanitation, plumbing installation, fire safety, power engineering and other basic projects.
To produce rubber, oil and natural gas as raw materials, diene and olefin as a single polymer polymer polymer. The polymer of rubber has already improved the technology of single polymer, which is made of polymer, and the cost is quite low.
Flexible rubber joint It is a kind of pipe joint with high elasticity, high sealing, material resistance and weather resistance. Flexible rubber joint uses the advantages of rubber, such as ductility, high sealing, material resistance, aging resistance and radiation resistance. In the manufacturing process, polyester cord fabric with high toughness, strong cold and heat resistance is selected and compounded with it, and then it is vulcanized by high pressure and high temperature abrasives. The following are three installation knowledge of flexible rubber joint:
1. Installation of flange rubber joint: before the installation of flange rubber joint, the pipes on both sides that need to be connected shall be placed on the leveling surface. During the installation, the pipe at one end which is firmly fixed shall be leveled, and then the flange on the rubber joint shall be rotated to make the flange hole align around. Screw on the screw and cover the nut tightly, and then the flange of the other end pipe fitting shall be horizontally aligned with the flange on the rubber joint Turn the flange on the rubber joint to make the four sides of the flange face to face. Screw on the screw, cover the nut tightly, and level the position to make the three closely connected, so as to prevent tight sealing.
2. Installation of threaded rubber joint: Screw rubber joint Before installation, the pipes on both sides that need to be connected shall be placed on the leveling surface. During installation, the screw rubber joint shall be screwed on one of the pipe fittings, and then the pipe at the other end shall be screwed on the horizontal surface all the time, so as to prevent the rubber ball from tearing due to uneven support during the installation process. The screw rubber joint and the pipe fittings on both sides shall not be easily fixed Rashin or distorted objects.
3. Installation of clamp connection rubber joint: clamp is used to replace flange and bolt. During installation, two branch pipes of clamp type rubber joint can be respectively set on the pipe to be connected at the side, and the rubber joint and pipe can be fixed and connected according to the clamp.