在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

Our company develops and produces new sleeve compensator

Time: 04-10 󰃯 Reading times: 668 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: Due to the damage of structure and sealing material filling of large diameter sleeve compensator, it can not be well integrated into the application requirements of pipeline in the whole process of production, manufacturing and application. Therefore, the traditional corrugated compensator has been used in large-diameter pipeline engineering projects

Large diameter sleeve Compensator Due to the damage of structure and sealing material filling, it can not be well integrated into the application requirements of pipeline in the whole process of production, manufacturing and application. Therefore, in the large diameter pipeline project, the traditional one has been selected Corrugated compensator Due to the influence of the structure and compensation amount of the traditional corrugated compensator, several compensator products need to be modified in the long-distance pipeline system to consider the application requirements of the pipeline system software. This virtually increases the cost of the construction project, and also causes a lot of trouble to the maintenance of the engineering project in the middle and later period After many years of technology, the large diameter sleeve compensator developed by our company has been successfully put into production according to the industrial product inspection of the General Administration of technical supervision and inspection.
The large-diameter sleeve compensator manufactured by our company has improved the original structure and reasonably prevented the large-diameter sleeve compensator from being damaged by specifications in the whole process of rubber seal filling. The problem of uneven distribution of rubber seals in the sealing cavity is easy to be considered. It is very good to consider the drag of expansion body in the process of compensation movement In the whole process of operation, the damage to rubber seals is solved. In the whole process of operation, the sealing materials are damaged by the use environment. This technology makes up for the blank of the same industry in China.
The key points of sleeve compensator in pipeline end application are as follows
Steel sleeve compensator is also called steel sleeve specification compensation connector Expansion joint One end of the flange is connected with the flange on the pipe or the flange of valve fittings, and the other end inserts the water pipe into the socket. The inserted length should be slightly lower than the total length of the commodity. The insertion end of the water pipe can be marked in advance to prepare for insertion. It is easy to master. Before installation, check whether the adjusting anchor bolt is in a loose and strong state, and the silicone sealing ring inside the bearing mouth shall not be extruded. When inserting the water inlet pipe, wipe the soap solution on the water pipe in advance to reduce friction and insert conveniently. After the water pipe is inserted, the system should be slowly circulated, and the adjustment anchor bolt should be tightened to facilitate the close contact between the silicone sealing ring inside the socket and the water pipe.
When the sleeve compensator is used in the pipeline (i.e. the application at the nerve end of the pipeline), the setting of the famous buttress should be considered to offset the torsion caused by the material in the pipeline. The key application of steel sleeve compensator is the deviation of mechanical equipment and heating of pipeline system software to digest and absorb vibration and reduce noise. It can carry out offset digestion and absorption in every direction.