在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

What are the requirements of double flange force transfer joint for conveying materials

Time: 04-14 󰃯 Reading times: 1012 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: The double flange force transfer joint is widely used. It is mainly used for loose sleeve connection of pump, valve and other accessories. It is composed of flange loose sleeve expansion joint, short pipe flange, force transmission screw and other components, which can reduce the pressure thrust (blind plate force) of the connected parts and compensate the pipeline safety

Double flange Force transfer joint The main function is to use loose sleeve connection of pump, valve and other accessories Expansion joint It can reduce the pressure and thrust of the connected parts (blind plate force) and compensate the installation error of the pipeline. The double flange force transfer joint can not absorb the axial displacement.
The double flange force transmission joint is mainly used in the pipeline with both sides connected with the flange. When installing, adjust the installation length of both ends of the product and the flange, and tighten the gland bolts evenly in diagonal order to make them become a whole with certain displacement. The force transfer joint mainly depends on the angular displacement of the sphere to absorb or compensate the lateral displacement of the pipe in one or more directions Compensator It should be used in pairs. Single spherical compensator has no compensation ability.
In the process of double joint, the joint will be affected by several factors, such as the joint temperature and so on.
The temperature control range of the double flange force transfer joint is 180-200 degrees when it works. The temperature at this stage is more suitable for the force transfer joint, which will not affect the product and damage the product. It is easy to transport liquid and powder material, and it is not easy to transport powder material. For corrosive materials, we have to consider, because it is corrosive, so if the double flange transmission joint is used for transportation, it is necessary to regularly replace the pipeline or other equipment such as force transfer joint. The temperature, size, fluidity and corrosivity of materials should be strictly controlled to avoid controllable problems.