在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

Force of double flange force transfer joint in water conservancy construction project

Time: 04-15 󰃯 Reading times: 693 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: Water conservancy construction is a huge and lasting project, and the standard requirements are relatively high. In the water conservancy construction, the force transfer joint and expansion joint play an important role, and the expansion joint has good expansion and flexibility, so the requirements for connector are higher

Water conservancy construction is a huge and lasting project, and the standard requirements are relatively high, Force transfer joint and Expansion joint It plays an important role. The expansion joint has good expansion and flexibility, so it can be satisfied in the environment with high requirements for connector. The force transfer joint has the characteristics of good connectivity, not only has the function of connection, but also has the function of maintaining the pipeline when the pipeline is connected with each other.
Note: double flange connection is used to connect the pump. The double flange loose sleeve force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transmit the pressure torque (blind plate force) of the connected parts and compensate the pipeline deviation, and can not absorb the axial displacement. Important loose sleeve connection for pump, valve, pipeline, etc.
The double flange force transmission joint is composed of main parts such as itself, sealing ring, gland, expansion short pipe, etc. the product is suitable for adjusting the installation length of both sides of the product and the flange during installation, and tightening the gland bolts evenly at the top angle. It can be used as a whole with a certain displacement, which is convenient for installation and maintenance according to the on-site specifications, When in operation, it can transmit anti axial torque to the whole pipe.
The connection of double flange force transmission joint is to fix two pipes, pipe fittings or equipment on a flange plate respectively. Flange gasket is added between the two flange plates, and the connection is completed by bolt tightening. The force transmission expansion joint is divided into threaded connection flange and welding flange. The low pressure small diameter has the wire connection flange, the high pressure and the low pressure big diameter uses the welding flange, the different pressure flange thickness and the connection bolt diameter and the total number are different.
In the industrial pipeline, the use of flange connection is very common. At home, the pipe diameter is small, and it is low pressure, no flange connection can be seen. If in a boiler room or production site, there are flange connected pipes and equipment everywhere. Flange connection is to fix two pipes, pipe fittings or equipment on a flange plate, add flange gasket, and screw them together with bolts. Xinli pipeline is mainly engaged in the research and development of force transfer joints, double flange force transmission joints and other force transmission joints. The double flange force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transmit the pressure torque of the connected parts and compensate the pipeline deviation, but it can not absorb the axial displacement.