在白沙酒店晚上怎么叫服务

Welcome to Shanghai Luoying pipeline equipment Co., Ltd Official website! For details, please call 021-6221-2627

How to prevent problems of rubber joint in high pressure project

Time: 04-21 󰃯 Reading times: 809 󰃳 Editor in charge: The sea 󰃗 Column: product focus

Introduction: How to prevent problems of rubber joint in high pressure engineering project is described in detail. Rubber joint products are used in high-pressure pipeline engineering projects. Due to the harm of high pressure inside the pipeline, the rubber joint will appear face peeling and sealing surface water seepage

Explain in detail how to prevent Rubber joint There are problems in the high pressure project. The application of rubber joint products in high pressure pipeline engineering projects will lead to various hidden dangers such as end face peeling and sealing surface water seepage due to the high pressure inside the pipeline, which will cause certain hazards in the application of the project. Shanghai Luoying pipeline, as the manufacturer of various special rubber joint products for medium and high pressure pipeline system, is mainly engaged in the production of various special rubber joint products for medium and high pressure pipeline system The adhesive joint product industry has many years of experience in the production and manufacturing of technical specialty. The following is to introduce the technical and professional characteristics improvement made by our company in the production and manufacturing of high pressure rubber joint.
For the high pressure rubber joint, in the use of end face breaking and other conditions, our company has selected the improved steel plastic ring as the end face improvement body, which can reasonably improve the compressive strength, and prevent the end face of high pressure rubber joint from suffering from the flange tension resistance during the whole process of application, resulting in rubber
The end face of the joint pulled off from the fixed hole of the connecting flange, resulting in product failure and leakage; secondly, our company also improved the sealing performance of the rubber joint end face reasonably according to the improvement of the material of the rubber joint end face, which further guaranteed the reliability of the application in the high pressure pipeline system.
The rubber joint is similar to Rubber flexible joint There are not many differences, the flange in the anti-corrosion and matching level is higher than the domestic standards. The cost performance ratio is incomparable. In terms of service life, there is no big difference in the use environment, but the price difference is close to half.
Rubber joints are used for noise reduction, noise reduction and vibration reduction. However, the flange used for connecting equipment is indeed different. The middle flange is a flange with diameter, which is used to stabilize the rubber joint. The flange diameter is slope, which can contact rubber joint well. In order to protect the rubber ball from being damaged by the edge of flange when the rubber ball is completed, it is beneficial to increase Service life, especially in the use of large diameter pipes.
In the past, most of his joints with the inner wall of the rubber film were not qualified, and most of them were mechanical joints.
With the rapid development of science and technology, the rapid rise of the pipeline industry, people have their own products, but also can import some from other countries, in the case of selection, you must choose the appropriate products according to your requirements.